999国产精品999久久久久久,а√天堂资源中文最新版地址 ,《调教女仆》1~3在线观看

TranslationMobile

標稱厚度
額定厚度
公稱厚度
名義厚度

"nominal" in Chinese : adj. 1.名字的，列名的。 2.名義上的，空有其名的 ...
"thickness" in Chinese : n. 1.厚；粗；厚度；粗大。 2.濃度，濃厚，黏稠。 ...
"nominal cement thickness" in Chinese : 水泥環厚度名義值
"nominal cured thickness" in Chinese : 標示厚度標稱厚度
"nominal scaled flow thickness" in Chinese : 標示比例流量厚度
"nominal tomographic slice thickness" in Chinese : 標稱層厚
"nominal wall thickness" in Chinese : 標稱壁厚; 標稱管壁厚; 公稱的壁厚
"nominal" in Chinese : adj. 1.名字的，列名的。 2.名義上的，空有其名的；有名無實的。 3. ...
"t thickness" in Chinese : 厚度
"thickness" in Chinese : n. 1.厚；粗；厚度；粗大。 2.濃度，濃厚，黏稠。 3.密度；稠密。 4 ...
"a nominal price" in Chinese : 名義價（虛價）
"a nominal rent" in Chinese : 微不足道的租金
"current nominal" in Chinese : 市場現價
"horsepower nominal" in Chinese : 標稱馬力
"in nominal terms" in Chinese : 按名義價值計算

Examples

Standard test method for measuring the nominal thickness of geosynthetics
測量土工織物和地膜標定厚度的標準試驗方法
Nominal thickness of jacket
護套標稱厚度
Insulated nominal thickness
絕緣標稱厚度
Standard test method for measuring nominal thickness of permanent rolled erosion control products
永久滾軋防腐蝕產品的標稱厚度的測量的標準試驗方法
All boards and planks must be cut sufficiently full to stand the nominal thickness after kiln drying to 8 % moisture contents
拙譯：所有木板必須經充分切割，使其標稱厚度可以承受濕度為8 %的烘烤。
For a sheet of nominal thickness not listed in the table , the permissible variations shall be the same as the next greater thickness
對于標稱厚度不在所列的優選厚度之一者,其允許偏差應采用下一個較大的優選厚度的偏差。
Plates shall be ordered to theoretical weight , the added value to nominal thickness listed in table 2 shall be the theoretical thickness for calculating the weight
鋼板按理論重量交貨，用表2所列的公稱厚度的附加值作為計算重量的理論厚度。
Plates shall be ordered to theoretical weight , the added value to nominal thickness listed in table 2 plus nominal thickness shall be the theoretical thickness for weight calculation
鋼板按理論重量交貨，用公稱厚度加表2所列的附加值作為計算重量的理論厚度。
Nominal thickness of insulatioh should be in accordance with the stipulations of table 1 , table2 . - 10 % discrepancy is allowed , but the minimum thickness should be not less than 90 % - 0 . 1 of nominal thickness
2絕緣絕緣標和厚度符合表1 、表2的規定，允許有- 10 %的偏差，其最薄厚度應不小于標稱厚度的90 % - 0 . 1